Step by Step Guide to Setup HP Officejet and Deskjet Wireless Setup

on January 20 at 05:23 AM

If you are installing the HP Officejet 6950 printer for the first time, you have to follow the below given procedure carefully.

  1. Remove the printer from the box and remove all the packing materials that are present both inside and outside the printer.
  2. Connect one end of the power cord to the rear of the printer and other end of the power cord to an electrical outlet.
  3. Turn on your printer by pressing the power button. Insert the paper into the input tray, by opening it
  4. Set your preferences like country/region, language, date and time using the control panel
  5. Open the printer door and also the ink cartridge door. Push the tri-color ink cartridge into the left slot and black cartridge into the right slot of the cartridge.
  6. Insert the cartridge into its place and close the access door. The printer callibrates and the cartridge alignment page will print after alignment settings.
  7. Download the HP printer software from or website and install it by following the instructions that appear on the screen 

HP Officejet 6950 Mac setup


Network configuration

Before configuring your network, you have to check for the requirements. The requirements are device with Mac ver 10.6 or later  and a printer that is connected with either a wireless or wired network.

Go to the Wireless icon on your printer control panel and click the Settings. After clicking the icon, continue by clicking the Wireless Settings>Wireless Setup Wizard>Preferred Network. Now add your preferred network and the password for your prefered network. Wait until the connection is verified and successfully connected. Now you have to print a Test print or network report page.

HP Officejet 6950 Wireless Printer Setup

  1. Gather the network requirements like SSID and your network password. Do not connect the USB or Ethernet cable durint the printer setup. Download the software from
  2. Make sure that the printer and computer are turned on. The printer and computer should be on the same wireless network
  3. It is recommended to use the broadband internet access and turn on the printer using power button.
  1. Download the latest version of printing software for HP Officejet 6950 printer from and install it on your printer software by following the on-screen instructions.
  2. Click the Settings icon on the printer and click the Wirelss icon on your conrol panel to connect the printer to the wireless network.
  3. You can select any option like fax, copy, scan or print from the control panel and click OK button. The printer is now connected to the wireless network

HP Officejet 6950 Mac connecting to HP Printer

In the system preferences that appear in Apple menu, you have to select the Print and Fax from Hardware Section. Click the + icon to add your printer. Install it by clicking continue. Give a test print. Your connection is successfull if your printer prints a page.

HP Officejet 6950 Network configuration


Go to the Wi-Fi icon on your printer’s display. Click Settings iconWireless Settingswireless setup wizardPreferred Network and enter your preferred network and its password. Check whether your connection is successful and print a test page or network report page.

To connect your Windows operating system to HP printer, you have to select the Devices and printers from the control panel and click Add Printer. Install the printer and give a test print.

HP Officejet 6950 Windows Setup

Check for the compatibility of the operating system as the HP Officejet 6950 printers support the operating systems like Windows XP and later version of the windows. The printer should have an active network connection either a wired or a wireless network connection.


HP OfficeJet 6950  Printer Software and Driver Download

HP officeJet printer driver is easy to install from . It is not only easy to install but it is a mandatory feature as the updated printer drivers and software helps the printer to communicate with the computer. If you fail to install the printer software and driver, it may cause the printer to malfunction and not function as expected.

  1. Check out the official HP website in your computer to download and install the printer driver
  2. Enter your printer model number HP Officejet 6950 in the search option that is displayed in the HP website and click Enter to start your driver download.
  3. You will be directed to the HP OfficeJet printer’s page which has all the solutions and queries for HP OfficeJet printers according to your model
  4. You will find the software and drivers options in the page. Click that option and in the same page a query with an option GO appears. Click GO to continue installing the driver.
  5. After that you will be re-directed to the page where you will find the Driver-product installation software.
  6. This page consists of many information relevant to your printer like version of the driver, size of the file, release date of every single version and many more.
  7. Check for the windows compatibility because not all the OfficeJet printers will support the windows operating system version and the file size is may be large. Check your available space and start downloading the driver.
  8. The download may be little difficult as there are four download options and each are different and unique. Select any one option according to your wish
  9. i) Basic driver is the first option which allows you to choose only the driver for download.      ii)Firmware is the second option which allows you to choose the firmware updates available for your printer along with the driver download.   iii) Software e-Print is the third option used for network and wireless connected printers. iv) Utility diagnostic tool is the final option which allows you to choose HP Print and Scan Doctor for your windows computer.
  10. If you do not have any idea of choosing the correct one for your computer, try using the HP Support Assistant .
  11. The HP Support Assistant is a pre-installed app which recognizes the need of your system and keeps it update

Make use of the most current and updated version of the OfficeJet printer software from the It just takes a few steps to setup the software and driver from or 123 hp com oj6950 by following the below given instructions and install the printer driver successfully.


HP Officejet 6950 updated Printer driver 

You need to install the most updated HP printer driver on your windows or Mac operating system to utilize the features that your printer supports and set up your network computer connections.

  • Check the driver version updates which includes updates like fixing bugs, enhancing the performance and new printer features.
  • You have to download the setup file for Officejet 6950 printer driver by visiting the official website
  • Enter your model number HP Officejet 6950 in the search box, you will be directed to the main driver download page.Click Download and start your download.
  • Before downloading check whether your operating system is compatible and find a correct download for your device. Some of the operating systems that are compatible are given below.
  1. Windows XP 32-bit
  2. Windows XP 64-bit
  3. Windows Vista 32-bit
  4. Windows Vista 64-bit
  5. Windows 7 32-bit
  6. Windows 7 64-bit
  7. Windows 8 32-bit
  8. Windows 8 64-bit
  9. Windows 8.1 32-bit
  10. Windows 8.1 64-bit
  11. Windows 10 32-bit
  12. Windows 10 64-bit
  13. Mac OS X v (10.5, 10.6x. 10.7x, 10.8.x, 10.9.x, 10.10.x, 10.11.x, 10.12.x)
  • Download the compatible driver for your operating sysstem and connect the printer to the computer using the USB cable.
  • Turn on the computer and install the HP Officejet 6950 e-All-in-One Printer
  • Now you should remove the USB cable to the computer and do not connect it until you are suggested or prompted.
  • By visiting the, you need to download the compatible operating system version of the printer driver if you did not download the driver yet.
  • Run the setup file as administrator and it will start the installation wizard. Follow the intructions that appear on screen.
  • Connect the printer and tthe computer by using the USB cable when you are instructed to do so.
  • Manually enter the values for each step in the installation wizard and complete the setup
  • Finally you HP Officejet 6950 e-All-in-One Printer driver is successfully installed and now ready to work. 

Printer Updates

  • Visit the website or to download and install the software updates for Windows and Mac users. You can also install the full feature driver for HP printers that are released in 2013 and later.
  • The website allows you to download any available full feature basic drivers and driver updates for Windows, Mac and Linux
  • Use the HP Support Assistant in your Windows 7 and later operating system version. It helps you to install the software and drivers in an up to date version.
  • Utilise the above standards for a performance enhanced and bug fixed printer with high quality and reliable printer.
HP Deskjet 2600 setup – Learn how to setup

HP Deskjet printers can be connected to a computer by both wired and non-wireless connections. You can easily set up your printer from the computer or from a Smartphone. You can print, scan, and copy with this all in one printer. You will get a sharp and black text with high-spirited colors. In this blog, we are going to discuss HP Deskjet 2600 Wireless setup.

HP Deskjet 2600 setup

How you can do HP Deskjet 2600 wireless setup?

You can connect your printer to a Wi-Fi network in these easy steps mentioned below:

  1. Firstly, make sure your printer is connected to the same network to which your computer is connected.
  2. Press the “power on” button on your printer.
  3. Then, select the “setup” option.
  4. Go to the Network menu and click on “wireless setup”.
  5. A list will display on the screen then, click on your wireless network ID.
  6. Enter your network’s password and click on “done”.
  7. Then, select “ok” to save the settings.
  8. Finally, by following these steps, your HP Deskjet 2600 setup will be done.
  9. If you want to set up the password then, go to “HP Deskjet 2600 all-in-one printer setup wifi password” setting and your password will set up easily.
How to connect HP Deskjet 2600 printer on windows?

Once you are done with the above process, you can connect your HP Deskjet 2600 printer with Windows. The simple steps are:

  1. Firstly, turn on your HP Deskjet 2600 printer, your router, and your computer.
  2. Be sure that your printer is connected to your computer.
  3. Then, connect your HP Deskjet 2600 printer to the Wi-Fi networks. The steps for connecting your printer to a Wi-Fi network are already mentioned above.
  4. Go to the web browser and visit 123 hp/setup to download the HP printer driver.
  5. Then choose the model of your printer.
  6. Select the “download” option.
  7. Once it is downloaded then search for “control panel”.
  8. Select the option of “printer and driver”.
  9. In the next step, add your printer.
  10. Then select your HP Deskjet 2600 printer from the list and select “next”.
  11. Finally, your printer is connected to your windows.


To conclude, you can do HP Deskjet 2600 setup easily by following the above-mentioned steps. If you want to scan the documents and photos or want to check the ink cartridges, hp printer assistant will help you to manage it.


Comments (1)